|
|
|
||||||||
| Tech Update 2.1 (download 296kb) | Summary of the most popular roof member sizes |
| Tech Update 3.1 (download 298kb) | Roof batten spanning distances for the Wes-batten (100 x 38mm) for use in tile and sheet roofs |
| Tech Update 5.1 (download 296kb) | Stump bearing capacity for the Supastump (90 x 90mm dressed) H5 for use in footing type 1 application |
| Tech Update 6.0 (download 299kb) | Stump bearing capacity for the Supastump (100 x 100mm sawn) H5 for use in footing type 1 application |
| Tech Update 7.2 (download 297kb) | Roof underpurlin spanning distances for the Wunderpurlin (100 x 75mm) for use in tile and sheet roofs N1 and N2 wind classification |
| Tech Update 7.3 (download 303kb) | Roof underpurlin spanning distances for the Wunderpurlin (100 x 75mm) for use in tile and sheet roofs N3 and N4 wind classification |
| Tech Update 7.5 (download 314kb) | Manufacturing requirements for gang-nail jointed, nail laminated underpurlins |
| Tech Update 9 (download 307kb) | Manufacturing requirements for nail laminated beams |
| Tech Update 10.1 (download 315kb) | Roof strut lengths when using the Wunderpurlin (100 x 75mm) as a strut |
| Tech Update 11.1 (download 311kb) | Roof load widths for the structurally rated Masonry Top Plate (90 x 35mm) for tile roof in N1 to N4 wind classification |
| Tech Update 12.1 (download 311kb) | Roof load widths for the structurally rated Masonry Top Plate (90 x 35mm) for sheet roof in N1 to N4 wind classification |
| Tech Update 14 (download 317kb) | Comparison of Maximum permissible spanning capabilities between MGP10 and F7 graded pine |